By Category

Brands

About Octane

Main Menu Here

H&R Triple C Camber Adjustment Bolts now available from Octane

article photo

H&R Triple C Camber Adjustment Bolts

Triple C camber bolts replace standard bolts in the upper strut-to-knuckle mount on a MacPherson strut suspension setup. They have an eccentric lobe or cam built into them, allowing additional adjustment to the standard suspension geometry. The adjustment is controlled as the bolt is rotated as shown in the image.

Triple C Bolt Diameter (A) Strut Bracket Width (B) Part Number
10mm 36.0 - 48.0mm (1.42-1.89in) TC110
12mm 40.0 - 48.5mm (1.57-1.90in) TC112
14mm 35.0 - 48.0mm (1.38-1.92in) TC114
16mm 41.5 - 48.0mm (1.63-1.92in) TC116
17mm 35.0 - 50.00mm (1.38-1.97in) TC117
10mm 45.5 - 48.0mm (1.79-1.89in) TC210

Triple C Camber Adjustment Bolt Measurements - how to select your bolts

Parts relating to this article:

  • TC110: TRIPLE CCC 36 > 48 mm
  • TC112: TRIPLE CCC 40 > 48.5mm
  • TC114: TRIPLE CCC 35 > 48mm
  • TC116: TRIPLE CCC 41.5 > 48mm
  • TC117: TRIPLE CCC 35 > 50 mm
  • TC210: TRIPLE CCC 45.5 > 48mm
Back to Top