Front And Rear Suspension Bush Kit

A

Standard Alignment

KIT0169K

Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.

Quantity required: 1
Stock: No longer stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

Caster & Camber Adjustable

KIT0170K

Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.

Quantity required: 1
Stock: No longer stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

2

Engine Front Torque Arm

KDT974

The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

3

Engine Mount Insert Kit

SPF3981K

The insert fits into the voids of the original mounting bush and takes out some of the engine movement under acceleration and deceleration. This results in reduced stress on associated components (such as the exhaust system). Our insert has been caresfully developed to give greater control without introducing Noise, Vibration and Harshness into the cabin. Focus RS and ST Only

Quantity required: 1
Stock: In Stock

Kit Includes: 1 x Polyurethane Bush

Price: £30.51 (exc. VAT) (£36.61 inc. VAT)

4

Front and Rear Anti-Roll Bar Upgrade Kit

BFK003

Everything you need to 'Activate More Grip'. Contains BMF51X, BMR78XZ, KLC151 and KLC157. Engineered to 'Activate More Grip', BFK003 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm front Anti-Roll bar and 24mm 2-point adjustable rear Anti-Roll bar, the kit is completed with high-quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

5

Anti-Lift Kit - Front Wishbone Control arm lower inner rear bushing - Ford/Mazda/Volvo

KCA428

Important Notes: Adds +0.5deg caster + Anti-Lift. Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

6

24mm Extra-Heavy-Duty Front Anti-Roll Bar Upgrade

BMF51X

Important Notes: 24mm - non-adjustable - TUV certified. Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 24mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

7

Adjustable Front Anti-Roll Bar Links

KLC151

Suits models with 300mm link - adjustable extra heavy duty. Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

8

Front Steering bump steer correction kit

KCA405

Important Notes: Reduces factory toe out from 6mm to 1mm (at 60mm bump) Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing, it is beneficial to reduce the amount of bump steer to give a more positive feel - sharper handling - reduced rear passive steer, and reduce understeer.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

9

Complete Front Control Arm Kit

A

18mm Ball Joints - Up to Feb 2006

TRC1135

This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade. Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market. The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Arms, 2 x Ball Joints, 2 x Brackets, 4 x Polyurethane Bushes, 2 x Steel Tubes, 6 x Nuts

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

21mm Ball Joints - After March 2006

TRC1136

This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade. Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market. The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Arms, 2 x Ball Joints, 2 x Brackets, 4 x Polyurethane Bushes, 2 x Steel Tubes, 6 x Nuts

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

10

Control Arm Lower-Inner Front Bush Kit

SPF3115K

14mm Bolt - ST & RS

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Price: £64.04 (exc. VAT) (£76.85 inc. VAT)

11

Control Arm Lower-Inner Rear Bush

A

Standard Alignment Settings

SPF3368K

Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

Standard Alignment Settings with Bracket and Bolts

SPF4653K

Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Brackets

Price: £253.25 (exc. VAT) (£303.90 inc. VAT)

C

Steering-Pull Correction Kit

SPF3369K

1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

D

Performance Alignment Correction Kit

SPF3370K

2 x Offset Bushings; Approx 0.5 Degree Caster change per bush

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

12

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF3114-20K

OE bar with flats at bush mounting point

Quantity required: 1
Stock: No longer stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

To Fit Aftermarket Round Bars

SPF2141-21K

Suits 21mm Aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)

Quantity required: 1
Stock: No longer stocked

Kit Includes: 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

13

24mm Adjustable Rear Anti-Roll Bar

BMR78XZ

Important Notes: 24mm - 2 point adjustable - TUV certified Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 24mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

14

Rear Anti-Roll Bar Link Kit

KLC157

Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but most importantly ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

15

Rear - Lower Front Control Arms

KTA137

Heavy-duty adjustable alloy rear lower front control arms are designed to allow for increased range with easy on-car toe adjustment. Low-compliance bushings are used to minimise NVH and maximise longevity.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

16

Adjustable Control Arm Upper Rear

KTA138A

Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

17

Rear Control arms - Lower Front Arms

WA401

Important Notes: Supplied as a single arm so you will need to order two. Complete arm fitted with bushings. Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.

Quantity required: 2
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

18

Rear Control Arms - Upper Arms

WA402

Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market-leading Whiteline synthetic elastomer bushings.

Quantity required: 2
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

19

Blade Trailing Arm Front Bush

SPF3466K

Do not remove original shell 09/2002-05/2005

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

20

Control Arm Lower - Inner & Outer Bush

SPF2323K

"Front Arm"

Quantity required: 1
Stock: In Stock

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Price: £119.69 (exc. VAT) (£143.63 inc. VAT)

21

Control Arm Lower - Inner & Outer Bush

SPF2324K

"Rear Arm"

Quantity required: 1
Stock: In Stock

Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes

Price: £31.90 (exc. VAT) (£38.28 inc. VAT)

22