Control Arm Lower Assembly Kit

Left and Right Arms for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Toyota Celica and Corolla has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1072 by far the best repair choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions. SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

2

Camber Adjusting Bolt Kit

SPF4351-15K

Adds +/- 1.5 Degrees camberCamber Bolt Kit 15mm

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Bolts

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

3

Control Arm Lower-Inner Front Bush Kit

SPF0996K

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Price: £40.99 (exc. VAT) (£49.19 inc. VAT)

4

Control Arm Lower-Inner Rear Bush Kit

SPF3176K

Standard Replacement

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes

Price: £140.04 (exc. VAT) (£168.05 inc. VAT)

5

Control Arm Lower-Inner Rear Bush Kit - Double Offset

SPF3178K

Alignment Correction 1 Degree Caster Adjustment available A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

6

Control Arm Lower-Inner Rear Bush Kit - Single Offset

SPF3177K

Alignment Correction 0.5 Degree Caster Adjustment available Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.

Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.

This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.

Follow the installation instructions and the problem is solved.

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

7

Anti-Roll Bar Link

TRC4004

Cut To Length Link10mm Ball Joint Link

Minimum Length 80mm - Maximum Length 320mm

Quantity required: 2
Stock: 1 on order, due 12 April 2024

Kit Includes: 1 x Link

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

8

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC10200

10mm Ball Joint suits vehicles manufactured in the UK10mm Ball Joint Adjustable Link

Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.

Features & Benefits

6060-T5 Alloy Link
Ball for low friction and long life
Spanner provision for on-car adjustment
Eliminates Anti-Roll Bar link flex
Allows for neutral Anti-Roll Bar positioning
Maximises all positions on adjustable Anti-Roll Bars
Suits lowered or raised vehicles

SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Links

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

9

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC12200

12mm Ball Joint suits vehicles manufactured in Japan12mm Ball Joint Adjustable Link

Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.

Features & Benefits

6060-T5 Alloy Link
Ball for low friction and long life
Spanner provision for on-car adjustment
Eliminates Anti-Roll Bar link flex
Allows for neutral Anti-Roll Bar positioning
Maximises all positions on adjustable Anti-Roll Bars
Suits lowered or raised vehicles

SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Links

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

10

Anti-Roll Bar Mount Bush Kit

SPF3179-22K

standard sizeavailable Sizes 22 & 24mm

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.