Please Note: We are no longer a distributor of SuperPro products. As the former distributor, we have quantities of SuperPro product still in stock which are available at a substantial 'Clearance' discount through this website. If it is not in stock, we cannot supply it to you.

Front and Rear

1

Enhancement Bush Kit

KIT0209K
KIT0209K
Kit contains:
  • Front Control Arm Lower-Inner Front Bush Kit
  • Front Control Arm Lower-Inner Rear Bush Kit
  • Rear Control Arm Upper-Inner Bush Kit
  • Rear Control Arm Upper-Outer Bush Kit
  • Rear Control Arm Lower-Inner & Outer Bush Kit
  • Rear Trailing Arm Front Bush Kit
  • Rear Toe Control Arm Outer Bush Kit

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

Front

2

Heavy Duty 2 Position Blade Adjustable Sway Bar

A

22mm Bar

RC0011FZ-22
RC0011FZ-22

Quantity required: 1
Stock: No longer stocked

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

24mm Bar

RC0011FZ-24
RC0011FZ-24

Quantity required: 1
Stock: No longer stocked

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

3

Control Arm Lower Assembly Kit

TRC1058
TRC1058
The SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.

Quantity required: 1
Stock: No longer Stocked

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

4

Control Arm Lower-Inner Front Bush Kit

SPF3091K
SPF3091K

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

5

Control Arm Lower-Inner Rear Bush Kit

A

Standard Alignment Kit

SPF5110K
SPF5110K
standard replacement

Quantity required: 1
Stock: No longer stocked

Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

Steering-Pull Correction Kit

SPF5111K
SPF5111K
Alignment correction (single offset). Allows Caster adjustment on one side of the vehicle to correct slight steering pull (right-hand drive cars may pull to the left and right-hand drive vehicles may pull to the right). 0.5 Degree Caster Adjustment available Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Quantity required: 1
Stock: No longer stocked

Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

C

Performance Alignment Kit

SPF5112K
SPF5112K
Alignment Correction 1 Degree Caster Adjustment available A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1
Stock: No longer stocked

Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

6

Steering Rack & Pinion Mount Bush Kit

A

Includes OE Bush Removal Tool

SPF2889K
SPF2889K
This kit includes o.e bush removal tool

Quantity required: 1
Stock: No longer stocked

Kit Includes: 5 x Polyurethane Bushes, 2 x Steel Tubes, 1 x Washer(s) - used for Steel and / or Polyurethane, 1 x Sleeve, 1 x Polyurethane Rod, 4 x Nuts

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

B

Does Not Include OE Bush Removal Tool

SPF2889BK
SPF2889BK
Does not include removal tool

Quantity required: 1
Stock: No longer stocked

Kit Includes: 3 x Polyurethane Bushes, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

7

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1025
TRC1025
10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Links

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

8

Sway Bar Mount Bush Kit

SPF3096-21K
SPF3096-21K
standard Sizeavailable Sizes 18, 19, 20, 21, 22, 23, 24, 25 & 27mm

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

Rear

9

20mm Heavy Duty 2 Position Blade Adjustable Sway Bar

RC0096RZ-20
RC0096RZ-20

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

10

Control Arm Lower-Inner & Outer Bush Kit

SPF3391K
SPF3391K

Quantity required: 1
Stock: In Stock

Kit Includes: 4 x Steel Tubes, 4 x Sleeves, 4 x Polyurethane Bushes

Price: £144.49 (exc. VAT) (£173.39 inc. VAT)

11

Control Arm Upper-Inner Bush Kit

SPF3390K
SPF3390K

Quantity required: 1
Stock: In Stock

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Price: £49.83 (exc. VAT) (£59.80 inc. VAT)

12

Control Arm Upper-Outer Bush Kit

SPF3389K
SPF3389K

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

13

Crossmember Supplement Washers Bush Kit

SPF3007K
SPF3007K
Upper & Lower position, Only suited to vehicles with voids in original bushing top & bottom.

Quantity required: 1
Stock: In Stock

Kit Includes: 8 x Polyurethane Bushes

Price: £80.05 (exc. VAT) (£96.06 inc. VAT)

14

Crossmember Supplement Washers Bush Kit

SPF3008K
SPF3008K
Bottom location position only, when vehicle has solid top mount, fits into original rubber bushing

Quantity required: 1
Stock: In Stock

Kit Includes: 4 x Polyurethane Bushes

Price: £46.71 (exc. VAT) (£56.05 inc. VAT)

15

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1225
TRC1225
12mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Links

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

16

Sway Bar Mount Bush Kit

SPF2791-17K
SPF2791-17K
available Sizes 14, 16, 17, 18, 19, 20, 21, 22 & 24mm

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

17

Toe Control Arm Outer Bush Kit

SPF3392K
SPF3392K

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.

18

Trailing Arm Front Bush Kit

SPF3388-70K
SPF3388-70K

Quantity required: 1
Stock: No longer Stocked

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

PLEASE NOTE: This product is not currently available for sale. Please contact us for more information.