Track Widening Adapter Audi 4-hole
H&R Spezialfedern 70324571
Please note additional information and vehicle-specific technical notes!
DRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!
The original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.
8.) If the depth of the spacer is smaller than the length of the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.
Not usable with steel-rims!
