Suspension Kit, springs/shock absorbers Twin-Tube coil overs
H&R Spezialfedern 45851-10
The minimum clearance between tires and suspension/body parts is 5 mm. If the clearance is less than 5 mm, it has to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R.
Note DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
Lowering beyond the dimensions given in the type approval may result in damage. These damages are not covered by H&R.
Only for FA-strut clamp ø 55 mm
