Track Widening TRAK+® Wheel Spacers
H&R Spezialfedern 4025571
For cars with 5-hole wheels.
Please note additional information and vehicle-specific technical notes!
DR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.
The original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.
If the attachmet face is too small, spacers with an outer diameter of 150mm are available alternatively. Please find below the part numbers for these: DR-System 16 mm = 162555719 DR-System 24 mm = 242555713 DR-System 40 mm = 402555716 DRA-System 50 mm = 50255712
