Track Widening TRAK+® Wheel Spacers
H&R Spezialfedern 1465607
Please note additional information and vehicle-specific technical notes!
DR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.
Note 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!
These wheel spacers are mounted to the car with the original fastening elements.Additional accessory is not needed. Make sure the length of the original stud bolts is adequate.
