Products matching OEM B2A

Glow Plug

NGK 4479

NGK 4479

Specifications:

Glow Plug Design: Metal glow plug, Voltage [V]: 11.5, Current Strength [A]: 5.5, Resistor [Ohm]: 0.9, Overall Length [mm]: 70, Fitting Depth [mm]: 20.5, Thread Size: M12 x 1,25, Tightening Torque [Nm]: 23, Spanner Size: 12 mm, Connector type: M5 / 3,0-4,0 Nm

£Please Ask for Pricing

Oxygen Sensor

BLUE PRINT FEBI-ADBP700023

ADBP700023

Specifications:

Oxygen Sensor: Heated, External Thread Size: M18 x 1,5, Spanner Size: 22, Number of circuits: 4, Cable Length [mm]: 400, Observe service information:

In Stock
Estimated despatch 0-48 hours

£80.14 (inc. VAT)

Oxygen Sensor

BLUE PRINT FEBI-ADBP700060

ADBP700060

Specifications:

Oxygen Sensor: Heated, External Thread Size: M18 x 1,5, Spanner Size: 22, Number of circuits: 4, Cable Length [mm]: 510, Observe service information:

In Stock
Estimated despatch 0-48 hours

£63.34 (inc. VAT)

Oxygen Sensor

BLUE PRINT FEBI-ADBP700063

ADBP700063

Specifications:

Oxygen Sensor: Heated, External Thread Size: M18 x 1,5, Spanner Size: 22, Number of circuits: 4, Cable Length [mm]: 400, for OE number: CA09-18-861, Observe service information:

In Stock
Estimated despatch 0-48 hours

£62.87 (inc. VAT)

Sensor, wheel speed

Rear Axle Left, Rear Axle Right

BLUE PRINT FEBI-ADBP710130

ADBP710130

Specifications:

Number of connectors: 2, Fitting Position: Rear Axle Left, Fitting Position: Rear Axle Right, Cable Length [mm]: 870

In Stock
Estimated despatch 0-48 hours

£33.32

Suspension Spring

Front Axle

BLUE PRINT FEBI-ADBP880015

ADBP880015

Specifications:

Length [mm]: 351, Outer Diameter [mm]: 160, Spring Design: Coil spring with constant wire diameter, Fitting Position: Front Axle, Wire Diameter [mm]: 14, Replace in pairs only:

£Please Ask for Pricing

Clutch Kit

BLUE PRINT FEBI-ADF123014

ADF123014

Specifications:

Outer Diameter [mm]: 220, Number of Teeth: 17, Multi-piece: two-piece, Supplementary Article/Supplementary Info: with synthetic grease, Observe service information:

In Stock
Estimated despatch 0-48 hours

£91.74 (inc. VAT)

Timing Belt

BLUE PRINT FEBI-ADL147502

ADL147502

Specifications:

Width [mm]: 22, Number of Teeth: 129, Belts: with trapezoidal tooth profile

In Stock
Estimated despatch 0-48 hours

£34.73 (inc. VAT)

Oil Filter

BLUE PRINT FEBI-ADM52117

ADM52117

Specifications:

Filter type: Spin-on Filter, Height [mm]: 120, Outer Diameter [mm]: 77, Internal Thread Size: 3/4" - 16 UNF, Seal Ring Diameter [mm]: 71.5, Observe service information:

In Stock
Estimated despatch 0-48 hours

£10.33

Oil Filter

BLUE PRINT FEBI-ADT32101

ADT32101

Specifications:

Filter type: Spin-on Filter, Housing material: Sheet Steel, Height [mm]: 139, Outer Diameter [mm]: 95, Internal Thread Size: 3/4" - 16 UNF, Observe service information:

In Stock
Estimated despatch 0-48 hours

£11.38

Previous Page